Tel:
SICHUAN GUANGHAN SHIDA CARBON CO., LTD.
SICHUAN GUANGHAN SHIDA CARBON CO., LTD.

Build The World Brand of Carbon

Home ProductsElectric Arc Furnace Graphite Electrodes

UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance

UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance

  • UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance
UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance
Product Details:
Place of Origin: CHINA
Brand Name: SHIDA CARBON
Certification: ISO9001:2015
Model Number: 600mm UHP
Payment & Shipping Terms:
Minimum Order Quantity: 20MT
Price: negotiable
Packaging Details: 15unit/40" HQ
Delivery Time: 10 working days
Payment Terms: L/C, T/T, D/A, D/P
Supply Ability: 50000MT/year
Contact Now
Detailed Product Description
Product: UHP 600mm Grade: Ultra High Power
Diameter: 24 Inch, 600mm Length: 2700mm, 2400mm, 2100mm
Bulk Density: 1.7-1.74g/cm3 Specific Resistance: 4.6 - 5.4 µΩ.m
Modulus Of Rupture: 10-14MPa Modulus of Elastic: 8.5- 12.5GPa
CTE: ≤1.5 Ash: 0.1 ~0.3%
Nipple: 3TPI/T4L/T4N Or Customized Raw Material: 100% Imported Needle Coke
High Light:

24 Inch Electric Arc Furnace Graphite Electrodes

,

UHP600 Electric Arc Furnace Graphite Electrodes

,

UHP600 graphite electrode uhp

UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance

 

Introduction

 

Graphite electrode is made of petroleum coke and imported needle coke. It is widely used in electric arc furnace and refining furnace. It is suitable for producing alloy steel and other metal. Grade: regular power (RP), high power (HP), ultra-high power (UHP) graphite electrode, diameter ranges from Φ 100- Φ 800, this product has low resistivity, good conductivity and thermal conductivity, good oxidation resistance, strong thermal shock resistance and mechanical vibration resistance, high mechanical strength, high mechanical processing strength and other characteristics.

 

 

Operation Instruction:

  • Screw lifting plug into socket of one end and place soft protection material under the other end(see pic.1) to avoid damaging nipple;
  • Blow dust and dirt on the surface and socket of electrode and nipple with compressed air; use brush to clean if compressed air cannot do it well (see pic.2);
  • Use a proper torque value (see recommended torque value table) to properly lock electrode (see pic.3);
  • In order to avoid crushes during furnace charging, please place bulk materials at the furnace bottom; meanwhile please do not place lime or any other non-conductive materials right under the electrodes, otherwise it will decrease electric conductivity and cause breakage;
  • Attention furnace cover’s position in order to avoid scratching or damaging when rising and lowering electrodes;
  • If any connection gap observed after jointing, the causes must be identified and eliminated before use;
  • Electrode clamp must be hold at the proper position: outside the safety lines of the higher end;
  • Attention impact from collapsing materials during melting, operations of rising and lowering must be taken on time;
  • Electrode breakage happens during refining period due to thinner electrodes cause nipple dropping and consumption increase, please don’t use electrodes to raise carbon content.
  • Please don’t mixed use electrodes from different manufacturers due to raw material and technologies are different from each manufacturer, chemical and physical proper ties are various as well.

          ​UHP600 24 Inch Electric Arc Furnace Graphite Electrodes Oxidation Resistance 0

 

 

Contact Details
SICHUAN GUANGHAN SHIDA CARBON CO., LTD.

Contact Person: sales

Tel: +8613281182772

Send your inquiry directly to us
SICHUAN GUANGHAN SHIDA CARBON CO., LTD.
Room 1011, 47 Yongfeng Road, Hi-Tech District, Chengdu, 610041,Sichuan Province, P.R. China.
Tel:86-028-66856611
Mobile Site Privacy Policy China Good Quality Carbon Graphite Electrodes Supplier. © 2020 - 2021 shida-carbon.com. All Rights Reserved.