Free sample for Uhp28 Graphite Electrode - UHP500 Shida Carbon Graphite Electrode – Shida

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Wholesale Carbon Steel Electrode , Wholesale Graphite Carbon Electrode , Graphite Electrodes With 3tpi Nipples , Items won certifications with the regional and international primary authorities. For far more detailed information, please contact us!
Free sample for Uhp28 Graphite Electrode - UHP500 Shida Carbon Graphite Electrode – Shida Detail:

Technical Parameter

Item

Unit

UHP

UHP Nipple

500mm / 20inch

Bulk Density

g/cm3

1.66-1.73

1.80-1.85

Resistivity

μΩm

4.8-6.0

3.0-4.3

Flexual Strength

MPa

10.5-15.0

20.0-30.0

Elastic Modulus

GPa

8.0-10.0

16.0-20.0

CTE (30-600)

10-6/℃

≤1.5

≤1.3

Ash Content

%

≤0.3

≤0.3

Instruction

2

1.Screw lifting plug into socket of one end and place soft protection material under the other end(see pic.1) to avoid damaging nipple;

2.Blow dust and dirt on the surface and socket of electrode and nipple with compressed air; use brush to clean if compressed air cannot do it well (see pic.2);

3.Use a proper torque value (see recommended torque value table) to properly lock electrode (see pic.3);

4.In order to avoid crushes during furnace charging, please place bulk materials at the furnace bottom; meanwhile please do not place lime or any other non-conductive materials right under the electrodes, otherwise it will decrease electric conductivity and cause breakage;

5.Attention furnace cover’s position in order to avoid scratching or damaging when rising and lowering electrodes;

6.If any connection gap observed after jointing, the causes must be identified and eliminated before use;

7.Electrode clamper must be hold at the proper position: outside the safety lines of the higher end;

8.Attention impact on electrodes from collapsing materials during melting, operations of rising and lowering must be taken on time;

9.Electrode breakage happens during refining period due to thinner electrodes cause nipple dropping and consumption increase, please don’t use electrodes to raise carbon content.

10.Please don’t mixed use electrodes from different manufacturers due to raw material and technologies are different from each manufacturer, chemical and physical properties are various as well.


Product detail pictures:

Free sample for  Uhp28 Graphite Electrode  - UHP500 Shida Carbon Graphite Electrode  – Shida detail pictures


Related Product Guide:

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Free sample for Uhp28 Graphite Electrode - UHP500 Shida Carbon Graphite Electrode – Shida, The product will supply to all over the world, such as: Lesotho, Cairo, Muscat, Excellent quality comes from our adherence to every detail, and customer satisfaction comes from our sincere dedication. Relying on advanced technology and industry reputation of good cooperation, we try our best to provide more quality products and services to our customers, and all of us are willing to strengthen exchanges with domestic and foreign customers and sincere cooperation, to build a better future.
  • This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Marcie Green from Jakarta - 2018.11.11 19:52
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Ella from Nigeria - 2017.06.25 12:48